Stewart Handling Systems
Products
Additional Online ProductsFREE DEMO available upon request, contact us!LEASE TO OWN available Click to get details
Download PDF of this page  Print this page
 

Can Tumblers

Morse Can Tumblers provide aggressive corner-over-corner mixing action. Mix in your sealed cans or pails with these can rotators to reduce hazards and save clean-up. Use your pail and can mixer to blend the contents of closed 1 to 5 gallon pails or cans (4 to 19 liter pails or cans).

  • Morse 5-Gallon Can Tumblers mix or agitate small batches quickly and economically
  • Re-homogenize settled ingredients
  • Use as pail or can mixer to blend liquid or dry materials
  • Tumble pails of parts with media to deburr or polish them

                                             

                               Single Can Tumbler                         Double Can Tumbler

                             Rotate 1 can  at a time                Rotate 1 or 2 cans at a time

  • These pail and can mixers hold cans at an angle to horizontal resulting in a vigorous "corner-over-corner" mixing action
  • Can Tumblers rotate pails continuously in one direction. Pail mixers do NOT shake or oscillate cans.
  • Accept steel or plastic cans and pails:
    • Up to 12.5" (31 cm) diameter
    • 4.5" to 16.5" (12 to 42 cm) tall
    • Includes typical 5-gallon cans
  • Capacity: 100 Lb. (45.5 kg) per can
  • Tumbling speed: 23 RPM (19 RPM on 50Hz models)
  • Can tumblers provide exceptional savings when materials to be agitated are already packed in cans
  • Quickly secure pail in can mixer holder with hand wheel on threaded rod and locking handle
  • Can mixer base dimensions: 28" x 28" (71 x 71 cm).
  • Ship Dimensions: L48" W40" H29" (122 x 102 x 74 cm)

Motors on Morse 5-Gallon Can Tumblers

  • 1/4 HP, 60 Hz in choice of voltage, phase, TEFC or explosion proof (50 Hz also available)
  • Single phase, 115V TEFC version on model 2-305-1 or 1-305-1 includes a timer you set at 1 to 60 minutes for automatic shut-off. Timer is NOT available on other pail mixer models.
  • Air motors are also available. Air motors are vane-type and require correctly sized filter, regulator, lubricator, valve (FRL) and piping supplied by customer.

 

Contact Stewart Handling for further information on Morse Drum Handling Equipment



 
 
  Quantity:
 
   
 

Site Map | Site Credits: Ecreativeworks